| Home | Products |My account | News | About | Cart |
 









ECM
P.O. Box 4068
Queensbury, NY 12804

info@flyecm.com
phone: (518) 832 6726








 

 

Products and accessories

ECM Kits


Introducing the Apogee Sport, the all wood kit; all parts are laser cut and made from contest grade balsa. With an AUW of 4.0 oz and AG airfoils, this sailplane perfomace in penetratation has no competition [more]

Apogee Elite

The Apogee Elite; This full house 40" ship, performs outside of any limed class realm, with an AUW of 3.7 oz, and 4 servos on board, expect this model to get all your piloting skills out of you [more]

Accesories

Blue Bird BMS-303 Coreless Sub-Micro Servo::Weight: 4.1 grams, Size: 15.5 x 7.5 x 19 mm / 0.61 x 0.3 x 0.75 in, Torque At 4.8V: 10 oz.in
$16.5
   
TOBN Lithium Polymer 7.4V 200mAh:Can handle up to 10C (1.6A) continuous discharge, will fit all Apogee's up to 60" DLG
$19.25
   
Thin servo/harness wire: 28 AGW:Length: 1 meter (39 inches). Color: Black-Red-White. No Connectors. 28 AWG
$2
   
Ultra-Micro On/Off Switch With Pigtail:9mm x 5.5mm x 3mm switch body with mounting ears. 0.85mm diameter, 4" long wire leads are good for under 2 amp applications
$3.25
   
1 inch wide Blenderm:3M - Use for flexible hinges on control surfaces in full size DLGs
$3.25
   
Micro launching blade:This carbon blade includes 3 feet of carbon tow for rainforcement, works on all 40" micros
$5
   
Pushrod kit for 59” DLG:Ready to Use (RTU): Each kit includes two pushrods, one ruder (.018”) and one elevator (.014”), SS Spring Tempered rod with pre-stretched etched Teflon tubing - each push rod is 48" long
$12.5
   
#20 Etched (bondable) Teflon tube (per foot):.034" ID and .006" wall thickness (unstretched), .003" after stretching, it can be used for all Hand launch gliders - wire from .012" to .018"
$0.9
   
Mircro: Push rod replacement kit:Includes 36" of 'bondable' Teflon tubing and 60" of .012" "Spring Tempered" S/S wire - ideal for Micro DLG - makes a set of two
$6.5
   

 


ECM is a division of Dagen Technoligies, LLC